The Pop3 is the ONLY Multifuel Workshop Stove in the Range. Pricing & Buy Online
The 23Kg stove offers a heat output of up to 4Kw heating up to 3,200 cubic feet or 90 cubic metres of workspace.
The POPULAR stove has a rear flue outlet and will
require a 90-degree bend. The Flue is 100mm in diameter and is orderable only in vitreous 1mtr lengths. Bends of 45o and 90o
A minumum of 3 metres of flue is required for a good draw.
Your roof may be made of combustible material, so we offer a Roof Tile with the Boot already built in. This tile provides an area of 1600mm2 allowing you to pare back the roof material to provide a safe gap from the flue.
For roofs made from non-combustible material and these may be corrugated, we recommend the Boot with the Fixing Kit. The Fixing Kit comes with 78gm dispenser of silicone sealant, 1 trimming knife, 1 drill bit, 12 washered
fasteners, 12 plastic caps, lubricant, fitting instruction leaflet.
The top may be finished with either a Rain Top or a Swivel Cowl in galvanised steel.
Pop3 Multifuel Workshop Stove Specification
Diameter x Height
Weight
Heat Production
Cubic Feet Heated
Cubic Metres Heated
300 x 500
14KG
4kW
2,100
60
Available Pop3 Flue items: - 100mm diameter
Flue Items
Galvanised Steel
Vitreous Enamel
Stainless Steel
1mtr lengths
Part - WSFlue004
Part - WSFlue104
45o Bend
Part - WSFlue005
Part - WSFlue105
90o Bend
Part - WSFlue006
Part - WSFlue106
Rain Top (95mm)
Part - WSFlue051
Swivel Cowl (95mm)
Part - WSFlue061
Roof Flashings - Where pitch of roof is 0o - 40o
Roof Flashings
Tiled or Combustible Roofs
Corrugated or non-Combustible Roofs
Aluminium Tile + Boot
Part No.
SDA101B
Boot
Part Nos.
DF104G (If in 3rd metre of flue or above) DF204R (If in 2nd metre of flue or below)
Fixing Kit Part No.
Part - FX01
Where pitch of roof is greater than 40o
Roof Flashings
Tiled or Combustible Roofs
Corrugated or non-Combustible Roofs
Aluminium Tile + Boot
Part Nos.
SDA101B
Boot
Part No.
DF105G (If in 3rd metre of flue or above) DF205R (If in 2nd metre of flue or below)